springs as a set.
Brush spring force
7.65–10.01 N (27.54–36.03 oz)
(780–1021 gf)
7. Check:
Gear teeth
G
Damage/wear → Replace the gear.
8. Check:
Bearing"1"
G
Oil seal"2"
G
Damage/wear → Replace the defective
part(s).
EAS24800
ASSEMBLING THE STARTER MOTOR
1. Install:
Starter motor yoke "1"
G
Starter motor front cover "2"
G
Starter motor rear cover "3"
G
NOTE:
Align the match marks "a" on the starter motor
yoke with the match marks "b" on the front and
starter motor rear covers.
EAS24810
INSTALLING THE STARTER MOTOR
1. Install:
Starter motor
G
Starter motor bolts
G
Starter motor bolt
10 Nm (1.0 m•kg, 7.2 ft•lb)
ELECTRIC STARTER
2. Connect:
Starter motor lead
G
5-38