HP ProLiant DL180 Gen9 User Manual page 89

Remove the access panel (on page 24).
4.
Remove the PCI riser cage
5.
Identify the expansion slot compatible with the new option, and then remove the cover opposite that
6.
slot.
Verify that any switches or jumpers on the expansion board are set properly. For more information, see
7.
the documentation that ships with the option.
Install the expansion board.
8.
Install the PCI riser cage
9.
Connect all necessary internal cabling to the expansion board. For more information on these cabling
10.
requirements, see the documentation that ships with the option.
Install the access panel (on page 25).
11.
Do one of the following:
12.
Slide the server into the rack.
o
Install the server into the rack
o
Connect all necessary external cabling to the expansion board. For more information on these cabling
13.
requirements, see the documentation that ships with the option.
("Remove the PCI riser
("Install the PCI riser cages" on page 26).
("Installing the server into the
cages" on page 25).
rack" on page 36).
Hardware options installation 89