HP ProLiant DL180 Gen9 User Manual page 57

Connect the Mini-SAS cable to the storage controller.
c.
Install the air baffle (on page 30).
d.
Install the primary PCI riser cage
e.
Route the Mini-SAS cable through the cable clip on the air baffle, and then connect the cable to the
f.
drive backplane.
Secure the Mini-SAS cable in the right front chassis cable clip.
g.
Install the access panel (on page 25).
18.
Do one of the following:
19.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
20.
Install the drives ("Drive
21.
("Install the PCI riser
("Installing the server into the
options" on page 42).
cages" on page 26).
rack" on page 36).
Hardware options installation 57