Install The Air Baffle - HP ProLiant DL180 Gen9 User Manual

Remove the air baffle in the direction shown in the following image.
b.

Install the air baffle

CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
To install the component:
Do one of the following:
1.
If there is no full-length expansion board or a cabled half-length expansion board installed in a PCI
o
riser cage, install the air baffle in the direction shown in the following image.
For proper cooling, do not operate the server without the access panel, baffles,
Operations 30