Connect the fan cable to the system board.
17.
Store any unused fans as spares.
Install the air baffle (on page 30).
18.
If removed, install the PCI riser cage
19.
Install the access panel (on page 25).
20.
Do one of the following:
21.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
22.
Redundant fan option
To provide sufficient airflow to the system if a primary fan fails, the server supports redundant fans.
("Install the PCI riser
("Installing the server into the
cages" on page 26).
rack" on page 36).
Hardware options installation 78