Expansion Board Options - HP ProLiant DL180 Gen9 User Manual

PCI riser cage assembly installed in the secondary PCI riser location
o
CAUTION:
all PCI slots have either an expansion slot cover or an expansion board installed.
Install the access panel (on page 25).
9.
Do one of the following:
10.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
11.

Expansion board options

For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
CAUTION:
disconnect all power cords before removing or installing the PCI riser cage.
CAUTION:
all expansion slots have either an expansion slot cover or an expansion board installed.
To install the component:
Power down the server (on page 20).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 22).
o
To prevent improper cooling and thermal damage, do not operate the server unless
("Installing the server into the
To prevent damage to the server or expansion boards, power down the server, and
To prevent improper cooling and thermal damage, do not operate the server unless
rack" on page 36).
Hardware options installation 88