HP ProLiant DL180 Gen9 User Manual page 38

Position the power cord inside the clip, and then close the clip.
d.
Slide the clip forward until it is flushed against the edge of the power cord plug.
e.
Employ best practices to route and manage the power cords and other cables in the server rear panel.
4.
IMPORTANT:
in each of the cables to prevent damage to the cables when the server is extended from the rack.
Use the hook-and-loop strap included in the server shipping carton to secure the power cords and the
5.
other rear panel cables to the rack rail. For detailed instructions, see "Installing the rack rail
hook-and-loop strap (on page 39)."
Connect the power cord to the power source.
6.
When using cable management arm components, be sure to leave enough slack
Setup 38