Remove the server from the rack (on page 22).
o
Remove the access panel (on page 24).
4.
Remove the air baffle (on page 27).
5.
To determine which fan blanks need to be removed to install the additional fans, see "Fan population
6.
guidelines (on page 79)."
Remove the fan blank.
7.
Install the fan.
8.
Connect the fan cable to the system board.
9.
If removed, install the PCI riser cage
10.
Install the air baffle (on page 30).
11.
Install the access panel (on page 25).
12.
Do one of the following:
13.
Slide the server into the rack.
o
("Install the PCI riser
cages" on page 26).
Hardware options installation 80