HP ProLiant DL180 Gen9 User Manual page 55

Connect the Mini-SAS cable to the HBA.
c.
Install the air baffle (on page 30).
d.
Install the primary PCI riser cage
e.
Route the Mini-SAS cable through the cable clip on the air baffle, and then connect the cable to the
f.
drive backplane.
Secure the Mini-SAS cable in the right front chassis cable clip.
g.
To connect the 4-bay LFF hot-plug drive backplane to an HP Smart Array P-series Controller option,
17.
connect the 540-mm Mini-SAS cable:
("Install the PCI riser cages" on page 26).
Hardware options installation 55