HP ProLiant DL180 Gen9 User Manual page 87

Remove the access panel (on page 24).
4.
If you are installing this PCI riser cage assembly option in the primary PCIe riser location, remove the
5.
default primary PCI riser cage
If you are installing this PCI riser cage assembly option in the secondary PCI riser location, then remove
6.
the secondary PCI riser blank.
Retain the blank for future use.
Align the PCI riser board with the corresponding connector on the system board, and then press down
7.
the riser cage.
Push down the release tab, and then rotate it 180° clockwise.
8.
PCI riser cage assembly installed in the primary PCI riser location
o
("Remove the PCI riser cages" on page 25).
Hardware options installation 87