Setting The Tp (Traffic Program) Function Volume - Fiat 1998 Marea Service Manual

Electrical equipment
Radio system
55.
Further stations with traffic reports can be stored using the station selection buttons. To do this, follow the
instructions in the paragraph "Station tuning and storing" but first ensure you press the TP button to acti-
vate the TP function.
As an alternative to manual storing, you can also follow the instructions in the paragraph "Automatic sta-
tion storage (AUTOSTORE)" but first ensure you press the TP button to activate the TP function.
Point b)
If you want to receive traffic reports tune to a RDS TP station before inserting a tape or Compact Disc. If
a traffic report is transmitted while you are listening to a tape or Compact Disc then playback will be
temporarily stopped and will start again when the report is finished.
Point c)
Traffic information can still be received if you are not listening to the radio. Having tuned to a RDS TP
station and having set the volume to zero, if traffic information is transmitted from the same station, this
will be heard at the preset volume.
EXPERT
2 2
T P
4 5 1
Tfl
VOL..
Marea- Marea
NOTE The following are instructions for car-
rying out all the operations shown in
points a), b) and c) previously indi-
cated.
Point a)
To select a station with traffic reports service
press TP button (1) The message "TP" ap-
pears on the display.
If the first station does not provide traffic re-
ports, the radio automatically tunes to the
closest station that does provide them.
In some countries there are radio sta-
tions that do not transmit traffic re-
ports even with the TP function ac-
tive.
Setting the TP (Traffic Program) func-
tion volume
To select the traffic report volume press the
EXP button (1) until the message "EXPERT" is
displayed. Then press key "A"(2) or " • " (3)
until the message "TA VOL" is displayed. Use
keys 4 (4) and 5 (5) to select the required
volume. The volume can vary between 5 and
31.
Weekend
99 Range
Print n° 506.763/17