Fiat 1998 Marea Service Manual page 265

Marea-Marea
99 range
Copyright by Fiat Auto
Weekend®
16v
BUTTERFLY CASING
Removing-refitting
Proceed with the removal of the butterfly cas-
ing as follows:
- remove the bands illustrated (arrow); then
undo the two bolts (detail) and remove the
inlet hose complete with resonator;
- release the end of the accelerator cable from
the lever (A) then remove the adjustment
plate from the bracket (B) and move the ac-
celerator cable away;
- disconnect the engine idle speed actuator
connector (1);
- undo the four fixing bolts (arrow) and re-
move the butterfly casing.
When refitting, reverse the order of the opera-
tions carried out for the removal.
Adjust the accelerator control cable as de-
scribed in the paragraph below.
NOTE // the butterfly casing is being re-
placed, connect the diagnostic equip-
ment (Examiner) to the diagnostic
socket and carry out the zeroing and
self-learning procedures for the engine
idle adjustment actuator data (M.D.S.)
Engine
Fuel system
10.
51