Fiat 1998 Marea Service Manual page 123

Engine
Removing- refitting cylinder head
26
Marea- Marea Weekend ©
1. Tightening bolts fixing cylinder head to
cylinder block:
STAGE 1: Tighten the bolts to a torque of 3
daNm, following the order illus-
trated previously.
STAGE 2: Tighten the bolts through 90°
using tool 1860942000.
STAGE 3: Tighten all the bolts through a
further 90°.
2. Positino the camshaft housing gasket on
the cylinder head support plane.
3. Position the camshaft housing on the cylin-
der head, then remove the tappet retaining
tools 1860988000.
4. Using spanner 1860834000, tighten the
bolts fixing the camshaft housing to the
cylinder head to the recommended torque;
then position the protective caps for the
bolts.
Proceed with refitting the remaining
components, reversing the order of
the operations described for the re-
moval. When refitting the timing belt,
refer to the previous paragraph.
16v
99 range
Print n° 506.763/16