Function Selection; Band Selection - Fiat 1998 Marea Service Manual

Marea-Marea Weekend
99 Range
I R A D I O
/ 5 -
Copyright Fiat Auto
is o n
Electrical equipment

Function selection

As soon as the car radio is switched on, the
radio comes on. To select the Radio function
when listening to a cassette or a compact
dsic, keep pressing the MODE (1) button until
the message "RADIO" appears on the display.

Band selection

Press the BAND (1) button a number of times
to select the available frequency bands. The
relevant frequency band appears on the dis-
play. The possible messages are:
- "FM1", "FM2", "FM3" for FM bands
- "MV", medium wave, "LW", long wave, for
AM bands
Intelligent automatic tuning and search
(IS function)
Use the BAND (1) button to select band
"FM1", "FM2" or "FM3".
Press the intelligent automatic search function
IS button (2).
When the search is ended,
grammes are stored in radio IS memory first
followed by the stations based on their trans-
mission power. The IS memory can store up
to 30 stations. The reception remains active
even if no reception is possible; to stop it,
press one of the station selection buttons
(1,2,3,4,5,6).
To recall the stations stored in the IS memory
select the IS mode by pressing either the " _ "
or " T " button (3,4) for about 3 seconds until
the message "IS- -" is displayed followed by
"IS ON". Press button "A" or " T " to recall the
stored stations one by one.
Radio system
55.
the RDS pro-
19