Sdv Function (Volume Changing With Speed); Bal/Fader Function (Sound Distribution) - Fiat doblo User Manual

"SDV" FUNCTION (VOLUME
CHANGING WITH SPEED)
With the SDV function it is possible
to automatically adjust the radio vol-
ume level to the speed of the vehicle,
increasing it as the speed increases to
maintain the correct ratio with the
noise level in the passenger compart-
ment.
166
fig. 28
The adjustment levels available are
fig. 28:
– OFF (function off)
– VERY WEAK
– WEAK
– MEDIUM
– STRONG
– VERY STRONG.
To turn the function on/off or enter
the setting, proceed as follows:
– choose and confirm the "SDV"
function turning and pressing the knob
22-fig. 1;
– turn the knob again 22-fig. 1 to se-
lect a setting or turn the function off,
then press the actual knob.
F0D1010g
"BAL/FADER" FUNCTION
(SOUND DISTRIBUTION)
The "Bal/Fader" function shows a
schematic representation of the posi-
tion of the speakers in the vehicle
(left/right and front/rear). Sound dis-
tribution is represented by a small
square cursor.
To adjust sound distribution,
proceed as follows fig. 29:
– choose and confirm the "Bal/Fad-
er" function turning and pressing the
knob 22-fig. 1;
fig. 29
F0D1011g