Fiat 1998 Marea Service Manual page 372

Marea-Marea Weekend®*™
'99 range
Copyright Fiat Auto
®™
1.
Take off the oil vapour separator by und-
screwing the three retaining nuts.
2. Undo the manifold end pipe fittings from
the rail leading to the injectors and remove
them
3. Undo the retaining nuts and carefully re-
move the injector
NOTE To refit carry out the above opera-
11-00 Supersedes previous version
Interventions on car
bracket.
1870739000 to remove the injectors.
tions in reverse order and rep/ace the
washers underneath the injectors and
the pipes joining the manifold and
injectors. Manifold side and injector
side pipe fittings must be tightened to
a torque of 2.2 daNm.
Engine
10.
Use tool
3