Marea- Marea Weekend
99 Range
PROGRAMMING THE IGNITION KEY (only on 1910 JTD versions)
For any subjects not dealt with in the following pages, refer to the Fiat CODE system de-
scribed in the Service Manual for the Fiat Marea-Marea Weekend volume 2 (print no.
506.761 /01
In order to change the software configuration for the CODE system, follow the special procedure
below.
As well as the MASTER keys, you must also have two other main keys.
Copyright
Fiat Auto
™
Electrical equipment
9 ^ 9
Insert the MASTER (red) key in the OFF po-
sition.
Rotate the MASTER key to the ON position
( + 15). The CODE light will switch on for
0.7 sees.
Fiat CODE
5 5 ^
5 5