Removing-Refitting Accelerator Cable - Fiat 1998 Marea Service Manual

Engine
Fuel system
10.
56
Marea-Marea
REMOVING-REFITTING
CABLE
Disconnect the battery lead, then proceed as
follows:
1. Working from inside the vehicle, discon-
nect the control cable from its anchorage
on the accelerator pedal.
2. In the engine bay, turn the throttle valve
control lever (1) and disconnect the ac-
celerator control cable. Then withdraw
cable (2) from its support bracket.
3. Withdraw the flexible block from its an-
chorage hole on the dashboard bulkhead
and remove the accelerator cable assem-
bly.
4. Accelerator cable assembly.
P4F56IJ05
Weekend ^ i
ACCELERATOR
After assembly, adjust the accelerator
cable as described i the paragraph
"Adjusting throttle cable".
Publication
6 v
1998 range
no. 506.763/09