Table of Contents
Advertisement
66
en | Alarm
11.4
Alarm E-Mail
Alarm states can be documented by e-mail. The camera
automatically sends an e-mail to a user-defined e-mail address.
This makes it possible to notify a recipient who does not have a
video receiver.
11.4.1
Send alarm e-mail
Select On for the device to automatically send an alarm e-mail
in the event of an alarm.
11.4.2
Mail server IP address
Enter the IP address of a mail server that operates on the SMTP
standard (Simple Mail Transfer Protocol). Outgoing e-mails are
sent to the mail server via the address entered. Otherwise,
leave the box blank (0.0.0.0).
11.4.3
SMTP user name
Enter a registered user name for the chosen mail server.
11.4.4
SMTP password
Enter the required password for the registered user name.
11.4.5
Format
Select the data format of the alarm message.
–
–
When a mobile phone is used as the receiver, make sure to
activate the e-mail or SMS function, depending on the format,
so that these messages can be received. Obtain information on
operating your mobile phone from your mobile phone provider.
11.4.6
Image size
Select the size of the JPEG images that are to be sent from the
camera.
AM18-Q0611 | v5.50 | 2012.03
Standard (with JPEG): e-mail with JPEG image file
attachment.
SMS: e-mail in SMS format to an e-mail-to-SMS gateway
without an image attachment.
Software manual
Camera Browser Interface
Bosch Security Systems
Advertisement
Table of Contents
