Edit Token; Rf Keyfob; Add Keyfob; Delete Keyfob - Bosch Solution 144 User Manual

2. Once the token is presented the system will display
the owner of the token.
Token belongs to Ur2
Debbie Smith
Press OK or MENU
Access > Token >

Edit Token

This menu allows a Master user the ability to delete a token
for those users that have been assigned to the same
area(s) as the Master user.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [2] + [1].
A list of users will display on the keypad.
2. Use the [] and [] keys to select the user who's
token you want to delete, then press [OK] to select.
Edit Token Ur2
Debbie Smith
000000000
Press 0-9 OK to SAVE
3. When prompted press the [OK] key to confirm token
deletion.

RF Keyfob

This section outlines how to add and delete RF keyfobs
which provide an alternate method for users to turn an
area(s) on and off. The RF Keyfob must be compatible with
the RF Receiver that has been installed by the security
company.
Access > RF Keyfob >

Add Keyfob

This menu allows the security installer or a master user to
program the user's keyfob ID number.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [3] + [0].
A list of users will display on the keypad.
Ur1 John Smith
Ur2 Debbie Smith
Ur3 User 3 Name
Press

2. Use the [] and [] keys to select the user that you
want to add the RF keyfob ID, then press [OK] to
select. Alternatively, you can enter the user number
you, then press [OK].
The keypad will prompt you to enter the RF keyfob
Bosch Security Systems 04/12 BLCC600U
MENU 1-2-3
MENU 1-3-0
OK or MENU
ID number:
Enter Keyfob ID Ur16
User 16 Name
000000000
Press OK or MENU
3. Enter the RF Keyfob ID Number
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Access > RF Keyfob >

Delete Keyfob

This menu allows the security installer or a master user to
delete the RF keyfob ID that has been assigned to a user.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [3] + [1].
A list of users will display on the keypad.
Ur1 John Smith
Ur2 Debbie Smith
Ur3 User 3 Name
Press

2. Use the [] and [] keys to select the user that you
want to delete the keyfob, then press [OK] to select.
Alternatively, you can enter the user number, then
press [OK].
Delete Keyfob ID Ur2
Debbie Smith
009553507
Press OK or MENU
3. Press [OK] to delete the RF Keyfob ID number and
exit, or press [MENU] to exit without saving.
Access > User Properties >

User Name

This menu allows the master user to program the user's
name. A maximum of 16 characters can be entered.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [4] + [0].
A list of users will display on the keypad.
Ur1 John Smith
Ur2 Debbie Smith
Ur3 User 3 Name
Press

2. To program the user name, use the [] and [] keys
to select the user that you want to program, then
press [OK] to select. Alternatively, you can enter the
user number you want to program, then press [OK].
Solution 144 User Guide
MENU 1-3-1
OK or MENU
MENU 1-4-0
OK or MENU
13