Pppoa Ipv4&Ipv6 (Dual Stack) Users - Tenda AC1200 User Manual

 Steps 1~6 above for PPPoA and IPv4 Only Users
9) PPPoA IPv4&IPv6 (Dual Stack) Users
After you configure the ATM Interface (ADSL uplink) and select PPPoA as the DSL link type, you can start to set up
WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.

Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network protocol you
need: IPv4&IPv6 (Dual Stack). Click Next.
Wireless AC1200 ADSL2+ Dual Band Modem Router
--------------------------------------------------------------------------------------------------------------------------
51