5G; 141 - Tenda AC1200 User Manual

Wireless AC1200 ADSL2+ Dual Band Modem Router
functionality. Selecting Access Point enables access point functionality. Wireless bridge functionality will still be
available and wireless stations will be able to associate to the AP.
Bridge Action: There are three options available: Enabled, Enabled (Scan) and Disabled. Select Disabled in Bridge
Action which disables wireless bridge restriction. Any wireless bridge will be granted access. Selecting Enabled or
Enabled (Scan) enables wireless bridge restriction. Only those bridges selected in Remote Bridges will be granted
access. The Enabled (Scan) enables wireless bridge restriction and automatically scans the remote bridges.
Remote Bridges MAC Address: Specify the MAC address of the remote bridge. If you select the Enabled (Scan)
option in Bridge Restrict, system automatically scans the remote bridges and you only need to select those bridges and
their MAC addresses will be added to automatically.
Refresh: Click it to update the remote bridges. Wait for few seconds to update.
Apply/Save: Click it to apply and save the settings.
Note
The WDS feature (aka. Wireless Bridge) can only be implemented between 2 WDS-capable wireless devices. Plus, SSID,
channel, security settings and security key must be exactly the same on both such devices.
3.1.5 Station Info
Click Wireless > 2.4G > Station Info to enter the page where displays authenticated wireless stations and their status.

3.2 5G

3.2.1 Basic
Click Wireless > 5G > Basic to enter the page where you can configure the basic settings of the wireless network of
5GHz.

141