Tenda AC1200 User Manual page 49

Click Apply/Save to save your settings if everything is correctly set.
Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.
 Steps 1~7 above for IPoE and IPv6 Only Users
7) Bridging
If you wish to initiate a dialup directly from your PC for Internet access or enjoy the entire Internet connection (instead
of sharing it with others), you can use the Bridging DSL link type and create a dialup program on your PC.
After you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, you can start to set up
WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.
Wireless AC1200 ADSL2+ Dual Band Modem Router

------------------------------------------------------------------------------------------------------------------------------
45