Back Panel - Tenda AC1200 User Manual

Solid
WPS Blinking
Off
Solid
USB
Off
Solid
INTERNET Blinking
Off

Back Panel

Button & Interface
DSL
1/WAN
2/3
4/iTV
USB
Client connected successfully.
WPS LED starts blinking if you press the WPS button on the device or interface.
No wireless clients are connected. WPS LED turns off after blinking for 2 minutes.
Connection is successfully established on the USB port.
Connection is not established on the USB port.
Current client is connecting to the Internet; no data is transmitted via the Internet.
Current client is connecting to the Internet; data is transmitted via the Internet.
Current Internet client is not connecting to the Internet.
For connecting the router to the Internet via a phone cable provided by your ISP.
LAN port or WAN port. When you access the Internet via the DSL, this port works as a LAN
port which can be used to connect to a PC, a switch, or a router; when you access the Internet
via an Ethernet cable from your ISP directly, this port works as a WAN port, but this port
works as a LAN port by default, you need to go to the Management webpage to select
Ethernet type (namely, stimulate this port to function as a WAN port).
LAN port, used to cable the device to the local network devices such as computers.
LAN port or IPTV port. When IPTV feature is disabled, it works as a LAN port which can be
used to connect to a PC, switch or a router; when IPTV feature is enabled, it works as an IPTV
port, and it can only be connected to a Set-Top Box.
Note: IPTV feature is disabled by default.
Used to connect a USB device, such as a 3G USB modem, USB print server or storage
service.
Wireless AC1200 ADSL2+ Dual Band Modem Router
Description
4