Tenda AC1200 User Manual page 98

Wireless AC1200 ADSL2+ Dual Band Modem Router
Protocol: Select the protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP.
Internal Port Start/Internal Port End: The ports used by the server in the LAN.
After all the configurations, visitors on the Internet can access your server by simply using "Protocol Name://WAN IP
address: External Port".
Note
If you have enabled the UPnP functionality on both the router and your PC that is attached to one of the LAN port on the
router, you will be prompted on the Virtual Server page that the UPnP interface is being used.
Application Scenario:
You have set up one web server on the LAN. Web server——IP: 192.168.1.50, TCP port: 8090.
Now you hope friends on the Internet can access your web by Port 10480 through WAN port. WAN port——ipoe_eth1,
IP: 1.2.3.4
Configuration Steps:
Click Advanced Setup > NAT > Virtual Server to enter it and then click the Add button.

94