2.7 Bandwidth Control
Click Advanced Setup > Bandwidth Control, and check Bandwidth Control to enable this feature on the screen.
Up to 16 entries can be allowed.
Description: Enter the description of the controlled host.
IP Address Range: Enter the IP address of the host you want to control. It can be a single host or hosts. If you want
to limit a single IP address's bandwidth, just keep the start IP same with the end IP. Like, 192.168.100.2-2
Max Upstream Speed (Kbps): Set the max upstream speed.
Max downstream Speed (Kbps): Set the max downstream speed.
Status: You can change the current status of the controlled hosts, or you can select Enable/Disable from the
drop-down list to enable/disable the current control rule.
Action: Here display the actions you can do about the corresponding rule. There are tow actions: Edit and Delete.
Edit: Click the Edit button corresponding to the ID to eidt its control rule. Click OK to apply the
modification.
Delete: Click the Delete button corresponding to the ID to delete its control rule.
Wireless AC1200 ADSL2+ Dual Band Modem Router
104