Add: Aftre finishing the bandwidth control settings, click Add to generate the control rule.
Apply/Save: Click this button to activate your configurations.
2.8 Routing
2.8.1 Default Gateway
This section is to set the default forwarding interface of the data in the same network segment of the WAN IP or LAN IP
of your modem router. Click Advanced Setup > Routing > Default Gateway to enter this section.
Selected Default Gateway Interfaces: Displays the selected default gateway interfaces. Select a WAN interface and
click the
button to move it to the Available Routed WAN Interfaces box.
Available Routed WAN Interfaces: Displays the available routed WAN interfaces. Select a WAN interface and click
the
button to add it to the Selected Default Gateway Interfaces box.
Selected WAN Interface: Select the current effective default IPv6 gateway interface from the pull-down menu if you
use IPv6 connection.
Apply/Save: Click to save and activate your settings.
Wireless AC1200 ADSL2+ Dual Band Modem Router
105