Tenda AC1200 User Manual page 149

WPA/WAPI passphrase: Enter a WPA/WAPI network key.
WPA Group Rekey Interval: Specify a key update interval.
WPA/WAPI Encryption: Select TKIP, AES, or TKIP+AES.
Apply/Save: Click it to apply the current configurations.
3.2.3 MAC Filter
Click Wireless > 5G > MAC Filter to enter the page where you can configure the MAC filter of wireless network of
5GHz. The MAC-based Wireless Access Control feature can be used to allow or disallow clients to connect to your
wireless network.
MAC Restrict Mode：Disabled, Allow and Deny
Allow: Only allow PCs at specified MAC addresses (in the list) to connect to your wireless network.

Deny: Block only PCs at specified MAC addresses from connecting to your wireless network.

Disabled: Disable MAC filter feature..

Add: Click to add a MAC address.
Remove: To delete an existing MAC address, first check the Remove box next to the MAC address in list and then click
this button.
Example: To allow only the PC at the MAC address of 00:1A:3D:9C:BB:23 to connect to your wireless network, do as
follows:

Select Allow.

Click the Apply/Save button.

Enter 00:1A:3D:9C:BB:23 in the MAC address box as shown in the figure below.

Click Apply/Save.
Wireless AC1200 ADSL2+ Dual Band Modem Router
145