Wireless Bridge - Tenda AC1200 User Manual

Wireless AC1200 ADSL2+ Dual Band Modem Router
Note
1. If you select "Allow" MAC restrict mode and directly click Apply/Save instead of adding any MAC address to be
filtered, WPS will be disabled (You can go to Wireless > Security to check WPS status).
2. If you want to change the MAC filter mode above from "Allow" to "Deny", just select Deny and click Apply/Save.

3.1.4 Wireless Bridge

Click Wireless > 2.4G > Wireless Bridge to enter the page where you can configure bridge settings.
This page allows you to configure wireless bridge (also known as Wireless Distribution System) features of the wireless
LAN interface.
Wireless distribution system (WDS) is a system enabling the wireless interconnection of access points in an IEEE 802.11
network. It allows a wireless network to be expanded using multiple access points without the traditional requirement for
a wired backbone to link them.
AP Mode: You can select Wireless Bridge (also known as Wireless Distribution System) to disable access point
140