Ipoe Ipv4 Only Users - Tenda AC1200 User Manual

Click Apply/Save to save your settings if everything is correctly set.
Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.
 Steps 1~6 above for PPPoE and IPv6 Only users

4) IPoE IPv4 Only Users

If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask
and the gateway IP address, you need to select the IP over Ethernet (IPoE).
After you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, you can start to set up
WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.
Wireless AC1200 ADSL2+ Dual Band Modem Router


---------------------------------------------------------------------------------------------------------------------------
33