Access Control - Service; Update Firmware - Tenda AC1200 User Manual

Apply/Save: Click this button to save configurations.
Note
Password cannot contain a space.

5.5.2 Access Control - Service

Here you can manage the device either from LAN or WAN side using HTTP, ICMP, TELNET, and SNMP.
HTTP: Enabling the corresponding side (LAN/WAN) HTTP makes the device can be configured from the
corresponding side (LAN/WAN) by a(n) admin/user/support.
ICMP: Enabling the corresponding side (LAN/WAN) ICMP makes the device's connection can be diagnosed via ping IP
address from the corresponding side (LAN/WAN).
TELNET: Enabling the corresponding side (LAN/WAN) TELNET makes the user access the device via telnet from the
corresponding side (LAN/WAN) and view the device details. Telnet is usually used to diagnose the device fault by users
who know network knowledge.
SNMP: Enabling the corresponding side (LAN/WAN) SNMP makes users manage the device via SNMP management
client. This feature is usually used by network server or nerwork manager.
Note
1. If you are not an advanced user, we suggest you keep the default settings.
2. To access the device from the LAN side, log in the device with LAN IP address of the device as "admin" or "user";
to access the device from the WAN side, you must use the WAN IP address and log in as "support".

5.6 Update Firmware

Firmware upgrade is released periodically to improve the functionality of your device and add any new features. If you
run into a problem with a specific feature of the device you could go to our website (www.tendacn.com) to download the
latest firmware to update your device.
Wireless AC1200 ADSL2+ Dual Band Modem Router
155