Bridge Mode - Tenda HG7c Quick Installation Manual

Bridge mode

Tips:
When the ONT is set to Bridge mode, please con gure internet settings based on ISP
requirements.
Access internet over PPPoE
Connect a LAN port of the ONT to the WAN port of a router using an Ethernet cable.
Connect your computer to a LAN port of the router using an Ethernet cable.
Set up a PPPoE connection on the router as required.
After the settings, you can access the internet through the router.
Power adapter
Internet
LAN
1
Ethernet cable
Router
Reset WPS WAN 1 2 IPTV/3 POWER
WAN
LAN
2
Ethernet cable
Power source
Computer