Roof Top And Cut Mounting - Carrier Viento 200 Operation & Service Manual

Operation & Service Manual
Installation Box preparation
Carrier Transicold Europe
Drilling

Roof top and cut mounting

31/03/07
1. Present the drilling template – not supplied - (refer to the
bodybuilder drawing)
2. Mark out the 4 fixing holes and the electrical harness and
hoses hole
3. Drill the fixing holes.
drill ∅ 10 mm
4. For roof top mounting: drill a hole ∅ 80 mm to pass hoses
and harnesses.
Viento - Installation/Rev- #8/54