Operation & Service Manual
Installation Unit hoses
Right installation
Wrong installation
Carrier Transicold Europe
Mounting recommendations
Do not twist or curve the hose.
Keep enough length to avoid length variation when the
pipes are under pressure.
Pipes length can vary between -2% to +4%.
Using elbows and fittings make easier installations,
assist accessibility and increase hoses/pipes life.
Always insure that minimum radius is respected. Provide
a radius as big as possible to avoid constriction.
Module 6
Module 8
Module 10
Module 12
31/03/07
Minimum curve radius
80 mm
95 mm
110 mm
130 mm
Viento - Installation/Rev- #24/54