Carrier Viento 200 Operation & Service Manual page 39

Operation & Service Manual
Installation Cab command harness fitting
Carrier Transicold Europe
2. Fit the cab command (in specified location).
RECOMMENDATIONS
Take care not to pierce any harness or hoses
within the dashboard.
If the cab command is built into the
dashboard, fit it as far as possible from the
heating ducts.
Maximum temperature of exposure: 70°C
(158°F)
The cab command MUST NOT be located
behind the screen (T° too high and
obstruction of windscreen).
31/03/07 Viento - Installation/Rev- #39/54