Carrier Viento 200 Operation & Service Manual page 31

Operation & Service Manual
Installation Unit connection
Carrier Transicold Europe
Refrigeration hoses
31/03/07
6. Remove the Hot Gas valve (HGV) solenoid to connect the
HOT GAS LINE hose easily.
7. Connect the HOT GAS LINE fitting to the Hot Gas valve.
8. Re-install the Hot Gas valve solenoid.
9. Connect the LIQUID LINE HOSE to the filter drier.
RECOMMENDATIONS
45° fitting recommended if lateral outlet needed.
GENERALY, use the appropriate fitting
depending on the installation.
Viento - Installation/Rev- #31/54