Drain Pan - Carrier Viento 200 Operation & Service Manual

Operation & Service Manual
Installation Evaporator connection
Carrier Transicold Europe

Drain pan

10. Put the drain water pipe in place.
11. Connect the drain water hoses between drain water
12. Fix tie-wrap sockets to maintain drain tubes in the right
13. Insulate the two holes with silicone.
14. Instal the two evaporator sides.
31/03/07
RECOMMENDATIONS
A descent of MINIMUM 10 cm must be applied
between the drain water hoses pipe and the
hoses inside the body to help to drain water out.
pipes and evaporator water tubes.
position.
Viento - Installation/Rev- #36/54