Utility mode
6
Touch the button for the paper type to be set.
7
Press the [Start] key.
–
Only paper loaded into the bypass tray can be used.
A test pattern is printed.
8
Check that the distance from the starting print position of the test
pattern to the edge of the paper (c) is 4.2 mm.
–
If the distance is less than 4.2 mm, touch [+] to increase the
adjustment (between 0.2 mm and 3.0 mm).
–
If the distance is more than 4.2 mm, touch [-] to reduce the adjust-
ment (between -0.2 mm and -3.0 mm).
–
Each time [+] or [-] is touched, the value is increased or decreased
by one increment.
9
Press the [Start] key.
The adjusted test pattern is printed.
C451
c: 4.2 mm
11
c
11-64