Konica Minolta bizhub C451 User Manual page 514

Application functions
5
Touch [Print Position], and then select the printing position.
– To make fine adjustments to the printing position, touch [Adjust Po-
sition]. Select the desired direction under "Left & Right Adjustment"
or "Top & Bottom Adjustment", touch [↔] to switch between the in-
teger and the fraction, touch [–] and [+] to specify the adjustment
amount, and then touch [OK].
– If a decimal value is displayed in the screen, press the [C] (clear)
key, and then use the keypad to type in the adjustment amount. For
details on switching between decimal and fraction values, refer to
"System Settings" on page 11-20.
– If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
What are the limits on the adjustment amount?
?
% The print position can be finely adjusted in 1/16 inch increments.
Can no adjustments be made?
?
% To make no left/right or up/down adjustments, touch [No Adjust-
ment].
C451
7
7-97