Konica Minolta bizhub C451 User Manual page 131

Basic copy operations
The Original Size screen appears.
4
Select the document size, and then touch [OK].
– Touch [↑] or [↓] to display a different list of standard sizes.
– To specify a standard size, touch the button for the desired docu-
ment size.
– To specify a custom size, touch [Custom Size] to display the Cus-
tom Size screen. Specify the X and Y sides of the paper, and then
touch [OK].
– Touch [X] or [Y], touch [<->] to switch between the integer and the
fraction, and then touch [-] and [+] to specify the size of the paper.
– If a decimal value is displayed in the Custom Size screen, use the
keypad to type in the setting. For details on switching between dec-
imal and fraction values, refer to "System Settings" on page 11-20.
– If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
C451
Original Size screen
2
2-24