Additional copy operations
–
To stop copying while the screen for changing the settings is dis-
played, select the proof copy job to be stopped from the list of jobs
in the left panel, and then touch [Delete]. In the screen that appears,
requesting confirmation to delete the copy program, touch [Yes],
and then touch [OK].
–
To cancel changes to the settings in the screen for changing the
settings, press the [Reset] key while the screen for changing the
settings is displayed to reset the settings to those specified in step
2.
–
The number beside "Copies" in the screen for changing the settings
is the number of copies that will be printed when [Print] is touched.
8
Press the [Proof Copy] key to print another proof copy.
–
To stop the proof copy while scanning or printing, perform the op-
eration described in "Temporarily stopping scanning/printing" on
page 2-109.
9
Touch [Print].
The remaining copies are queued as a copy job.
C451
3
3-8