Per-Port Static Vlan Configuration Options - HP ProCurve Series 4100GL Management And Configuration Manual

Port-Based Virtual LANs (VLANs) and GVRP
Port-Based Virtual LANs (Static VLANs)
Figure 12-1. Comparing Per-Port VLAN Options With and Without GVRP
12-8

Per-Port Static VLAN Configuration Options

The following figure and table show the options you have for assigning
individual ports to a static VLAN. Note that GVRP, if configured, affects these
options and VLAN behavior on the switch. The display below shows the per-
port VLAN configuration options. Table 12-1 briefly describes these options.
Example of Per-Port
VLAN Configuration
with GVRP Disabled
(the default)
Table 12-1. Per-Port VLAN Configuration Options
Parameter Effect on Port Participation in Designated VLAN
Tagged Allows the port to join multiple VLANs.
Untagged Allows VLAN connection to a device that is configured for an untagged
VLAN instead of a tagged VLAN. The switch allows no more than one
untagged VLAN assignment per port.
No No
: Appears when the switch is not GVRP-enabled; prevents the port from
- or -
joining that VLAN.
Auto
Auto
: Appears when GVRP is enabled on the switch; allows the port to
dynamically join any advertised VLAN that has the same VID
Forbid
Prevents the port from joining the VLAN, regardless of whether GVRP is
enabled on the switch.
Enabling GVRP causes "No" to display as "Auto".
Example of Per-Port
VLAN Configuration
with GVRP Enabled