HP ProCurve Series 4100GL Management And Configuration Manual page 75

Figure 5-3. The Device Passwords Window
To set the passwords:
1. Access the Device Passwords screen by one of the following methods:
• If the Alert Log includes a "First Time Install" event entry, double
click on this event, then, in the resulting display, click on the
secure access to the device link.
Select the Security tab.
•
2. Click in the appropriate box in the Device Passwords window and enter
user names and passwords. You will be required to repeat the password
strings in the confirmation boxes.
Both the user names and passwords can be up to 16 printable ASCII
characters.
3. Click on [Apply Changes]
Using the HP Web Browser Interface
Tasks for Your First HP Web Browser Interface Session
to activate the user names and passwords.
5-9