HP ProCurve Series 4100GL Management And Configuration Manual page 221

Add NetworkAdmin to
operator noauth group
Figure 11-3. Assign Users to group for SNMPv3
C a u t i o n
Then you must set the group access level to the user. This is done with the
snmpv3 group command. For more details on the MIBs access for a give group
see "Group Access Levels" on page 11-10.
Adding a user without authentication and/or privacy to a group that requires
it will cause the user to not be able to access the switch. You should only add
users to the group that is appropriate for their security parameters
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Add NetwrokMgr to managerpriv group
Pre-assigned groups for
access by Version 2c and
version 1 management
applications
11-9