Per-Port Static Vlan Configuration Options - HP PROCURVE 2610 Advanced Traffic Management Manual

Per-Port Static VLAN Configuration Options

The following figure and table show the options you have for assigning
individual ports to a static VLAN. Note that GVRP, if configured, affects these
options and VLAN behavior on the switch. The display below shows the per-
port VLAN configuration options. Table 2-2 briefly describes these options.
Figure 2-5. Comparing Per-Port VLAN Options With and Without GVRP
Table 2-2. Per-Port VLAN Configuration Options
Parameter
Tagged
Untagged
No
- or ­
Auto
Forbid
Example of Per-Port
VLAN Configuration
with GVRP Disabled
(the default)
Enabling GVRP causes "No" to display as "Auto".
Effect on Port Participation in Designated VLAN
Allows the port to join multiple VLANs.
Allows VLAN connection to a device that is configured for an untagged
VLAN instead of a tagged VLAN. The switch allows no more than one
untagged VLAN assignment per port.
No
: Appears when the switch is not GVRP-enabled; prevents the port from
joining that VLAN.
Auto
: Appears when GVRP is enabled on the switch; allows the port to
dynamically join any advertised VLAN that has the same VID
Prevents the port from joining the VLAN, regardless of whether GVRP is
enabled on the switch.
Static Virtual LANs (VLANs)
Port-Based Virtual LANs (Static VLANs)
Example of Per-Port
VLAN Configuration
with GVRP Enabled
2-9