Spanning Tree Protocol (Stp) Information - HP ProCurve Series 4100GL Management And Configuration Manual

Monitoring and Analyzing Switch Operation
Status and Counters Data

Spanning Tree Protocol (STP) Information

Menu Access to STP Data
From the Main Menu, select:
1. Status and Counters . . .
8. Spanning Tree Information
STP must be enabled on the switch to display the following data:
Figure B-12. Example of Spanning Tree Information
Use this screen to determine current switch-level STP parameter settings and
statistics.
You can use the Show ports action at the bottom of the screen to display port-
level information and parameter settings for each port in the switch (including
port type, cost, priority, operating state, and designated bridge) as shown in
figure B-13.
B-17