802.1w Rapid Spanning Tree Protocol (RSTP) and 802.1d Spanning Tree Protocol (STP)
7. Press the
key or use the arrow keys to go to the next parameter you
[Tab]
want to change, then type in the new value or press the Space bar to select
a value. (To get help on this screen, press
line, then press
[H]
8.
Repeat step 6 for each additional parameter you want to change.
Please see "Optimizing the RSTP Configuration" on page 14-9 for recom
mendations on configuring RSTP to make it operate the most efficiently.
9. When you are finished editing parameters, press
Actions –> line and press
settings and return to the Main Menu.
10. If you have changed the Protocol Version, in step 1, reboot the switch now
by selecting
6. Reboot Switch
Web: Enabling or Disabling RSTP
In the web browser interface, you can enable or disable spanning tree on the
switch. If the default configuration is in effect such that RSTP is the selected
protocol version, enabling spanning tree through the web browser interface
will enable RSTP with its current configuration. To configure the other span
ning tree features, telnet to the switch console and use the CLI or menu.
To enable or disable spanning tree using the web browser interface:
Click on the Configuration tab.
1.
Click on Device Features.
2.
3.
Enable or disable spanning tree.
Click on Apply Changes to implement the configuration change.
4.
Configuring Rapid Reconfiguration Spanning Tree (RSTP)
, for Help, to display the online help.)
[S]
to save the currently displayed spanning tree
to select the Actions –>
[Enter]
[Enter]
to return to the
14-17