Getting Started
Introduction
1-2
Introduction
This Management and Configuration Guide is intended to support the
following switches:
HP ProCurve Switch 4104GL
■
HP ProCurve Switch 4108GL
■
■
HP ProCurve Switch 2626
■
HP ProCurve Switch 2650
HP ProCurve Switch 6108
■
This guide describes how to use the command line interface (CLI), Menu
interface, and web browser interface to configure, manage, and monitor
switch operation. A troubleshooting chapter is also included.
For information on other product documentation for the above switches, refer
to "Related Publications" on page 1-4.
The Product Documentation CD-ROM shipped with the switch includes a
copy of this guide. You can also download a copy from the HP ProCurve
website, http://www.hp.com/go/hpprocurve. (See "Getting Documentation From
the Web" on page 1-6.)
About the Feature Descriptions
In cases where a software feature is not available in all of the switch products
covered by this guide, the text specifically indicates which device(s) offer the
feature.