Table of Contents
Advertisement
installation
|
50
Note: Place surround on a soft surface to install brackets.
1. Install brackets onto the back of the surround - slide bracket behind
silver bracket on surround as shown below.
Bracket on Surround
2. Secure with 3 screws for each bracket in locations shown below.
3. Install the glass surround to the unit by hooking the left and right side
mounting brackets into the mounting slots at the side of the fi rebox
as shown below. It is recommended that you use the fi rst mounting
slot.
NOTE: There are 3 mounting slots available, this is to accommodate
any fi nishing that protrudes slightly beyond the surround.
50 |
Regency Horizon HZ30E-10 Gas Fireplace
919-451
VERONA / 4 PC. FACEPLATE INSTALLATION
VERONA / 4 PIECE SURROUND INSTALLATION
Tab on Surround
surround installation
1
HZ30E-10
Bracket in Unit
+1/2"
+1/4"
Use fi rst notch in bracket
for standard installation
Completed glass
09.29.14
Advertisement
Table of Contents
