Regency Horizon HZ30E-NG10 Owners & Installation Manual page 46

installation
|
46
4. Position Log 3, line up bottom pin landing on Log 3 with pin on Log 1.
The remainder of Log 3 will rest on the burner tray.
2
HZ30E shown - Log 3 install
5. Place Left Log (4) piece on burner tray, part of the Log should sit on
the lip of the burner tray as shown below.
2
4
HZ30E shown - Log 3 install
6. Place lava embers/rocks on glass - ensure rocks do not block pilot.
Do not place lava rocks/embers too close to logs as this may cause
carboning.
7. Adjust aeration, see unit manual for setting.
HZ30E shown - Final Install
46 |
Regency Horizon HZ30E-10 Gas Fireplace
919-265
1
HZ30E use top
3
pin landing
1
3
3
HZ33CE/HZ30E
07/10/13